Monday 16 January 2012

Wired Needlelace Elements for Stumpwork

Whilst I was working the stumpwork poppy recently, I took some photos of the technique for one of the petals, which I thought may be of interest to anyone who wants to know how to create a wired element for a stumpwork piece using needlelace.  (There's a fabric based one too.)

The first step is to create a wire outline for your selected shape.  In this case, I had the printed guide in the kit to help me, but you could also be working from something in a magazine, book or even your own drawing.  Naturally, it needs to be the exact size and you simply bend the wire to fit.  It doesn't have to be too exact a fit at this stage.  Stumpwork wire bends very easily too, so no special tools are needed.


The next stage is to couch the wire shape to a needlelace pad.  You make this pad yourself by folding a rectangular piece of fabric (here, lightweight calico is used) and tacking along the edge opposite the fold.  You will need two layers.  Couch the shape in place and at this point you will need to be as exact as you can manage in getting your shape correct.  It was easy for me at this point in the process as I could still see the impression of the shape from where I'd worked the first three petals.


Fasten on a length of thread by simply taking the needle under the couching stitches along one side of the shape.  Don't worry about any ends as they will be taken in later on.  Take the thread under the wire and into the shape and begin to fill in with your chosen stitch (in this case, detached buttonhole stitch) using the wire itself as the anchor for the first row.


Continue until the first row is done and, oh, don't pull these stitches too tight or work them too close together. When you get to the end of the row, take the needle back under the wire and then start the next row taking it over the wire back into the shape.


Anchor future rows onto existing stitches and keep on going until you run short on thread (or finish the shape, whichever is sooner!!).  It's good to use fairly long pieces of thread for this type of work, but that depends on how durable your thread is.  If you're working with a more delicate thread, such as silk or a metallic, then you'll need to take that into account.


When you come to the end of your piece of thread, anchor it off in much the same way you started the piece by running it under the couching stitches and along the stitches at the side of the shape.


Fasten on a new piece in the same way and continue working the filling stitch until you can't reasonably get any more stitches into it.


When your shape is full, then begin to work close buttonhole stitches all the way around the outside of the shape completely covering the wire and taking in any lose fastening on and off threads.  Fasten it off finally by hiding the thread as best you can among the stitches wherever there is a reasonable space that will not show.


Your shape is now complete, but still couched to the pad.  So, now snip away the tacking stitches holding the pad together and pull the two layers apart as much as you can to reveal the couching stitches between them.  Snip through some of these and pull them out.


Your shape should now come away cleanly in your hands and all you need do it pull out any odd couching threads (using a contrasting colour couching thread can make this much easier to do).


This method can be used with a variety of shapes as you can see here from a photo I took whilst working on the stumpwork bee wings a couple of years ago.  In this case, the filling stitch was working around in an almost complete oval along the wires and then just pulled together with a suitable stitch or two in the middle.


I hope this has given some insight into how these detached elements are made and has been helpful!  See the next post for how to assemble a wired flower!

© Elizabeth Braun 2012

25 comments:

  1. Thanks for sharing this technique with clear photos and instructions. Very useful.

    ReplyDelete
  2. Nie wiem jakim cudem tu trafiłam ale bardzo mi się podoba :) i będę stałym bywalcem. Tworzysz cudeńka.
    Pozdrawiam.

    ReplyDelete
  3. Anonymous7:49 am

    A tip I learned a while ago with stumpwork is if you layer clear sticky backed plastic film (such as the stuff used for covering books)over the pad then it means the needle slides over it and there's no chance of catching any of the calico when you're stitching the stumpwork!

    ReplyDelete
  4. Really helpful post, I'm just learning so finding all your stumpwork posts really useful.

    ReplyDelete
  5. Very clear, Elizabeth, well done!

    ReplyDelete
  6. I've crawled on-line briefly just to say hello!
    This is a really super tutorial, really well thought out and presented, and it looks great. Thanks for your lovely, supportive comments, which really cheered me up! x:)

    ReplyDelete
  7. Oh - and I love the beetles! Many congratulations sweetie!

    ReplyDelete
  8. I saw you on Craft Gossip and popped over to take a closer look. Your work is beautiful.

    ReplyDelete
  9. I was going to try and figure out how you made the very beautiful dragonfly wings in your banner photo: now I can just follow your tutorial! Thank you so much for sharing! (I found you originally through TAST)

    ReplyDelete
  10. Looks great Elizabeth having the two layers of fabric is such a good hint. I hate having to unpick the couching threads

    ReplyDelete
  11. thanks for sharing

    ReplyDelete
  12. Very useful technique, thanks for sharing.

    ReplyDelete
  13. Great tutorial, very clear to understand. I can't wait to try this. Thank you for sharing Elizabeth!

    ReplyDelete
  14. Your tutorial is something which interests me very much. I am grateful for it.

    ReplyDelete
  15. This is an awesome tutorial! Many thanks for sharing it!
    Smiles, Cyndi

    ReplyDelete
  16. It looks like you made needle lace. I have done that many, many years ago.

    ReplyDelete
  17. That 2 layer method is really neat! (as in cool, as well as .... well, neat :-). Thankyou.

    ReplyDelete
  18. I've just posted a link to this tutorial over in Stitchin Fingers/Stumpwork and Raised Embroidery, and raised a few questions re using plastic covering over the needlepad for protection, for discussion by the group....

    ReplyDelete
  19. Anonymous6:36 pm

    This is a brilliant technique! I have been working on something similar and this is a much easier and better way to do it. Thanks!

    ReplyDelete
  20. Thanks for sharing this! Nice tutorial! It is easy to follow and also easy to understand. Yeah, this is much easier, and much neater to do. Kudos!

    ReplyDelete
  21. Great tutorial...Love the work so much. I am your follower now.

    ReplyDelete
  22. Thanks for the tutorial. Very clear & concise.

    Like you I have been stitching the outside perimeter buttonhole stitches AFTER I filled the motif. However, yesterday I read in Jane Nicholas's Stumwork Embroidery to do the reverse. I started to stitch a petal like that and it became increasingly clear that this creates issues (like how to tie off ends). So I popped on the web to see how others do it. So glad I found your post.


    ReplyDelete
  23. Thanks for the tutorial. Very clear & concise.

    Like you I have been stitching the outside perimeter buttonhole stitches AFTER I filled the motif. However, yesterday I read in Jane Nicholas's Stumwork Embroidery to do the reverse. I started to stitch a petal like that and it became increasingly clear that this creates issues (like how to tie off ends). So I popped on the web to see how others do it. So glad I found your post.


    ReplyDelete
  24. Wonderful love the explanation and beautiful pictures thank you from Carollyn at "Carollyn's tatting Blog"

    ReplyDelete
  25. Es la primera vez que me encontré con su maravillosa página,soy una mujer mayor a la que le encantan los bordado y me siento muy agradecida con usted al permitir que sus conocimientos lleguen a tantas personas como yo. Me encantaría si le fuera posible, recibir sus enseñanzas desde hoy en adelante. Nuevamente gracias. Soy de Bogotá-Colombia.

    ReplyDelete

Thanks for your visit. I love to read your comments! ♡
Moderation enabled owing to spam (which is always deleted). :(
July 2022